How do I Find My Acura, Honda Accord, Civic, CR-V, Pilot, Odyssey & Ridgeline Cabin Air Filter

Your cabin air filter is located behind your glove box. First, open up your glove box and locate the glove box stop feature. Normally, it’s on the right-hand side of the glove box. Remove the fastener holding the stop feature, which could be a clip or a screw. Depending on your model, you might have a cable or a rod, which will now hang free. Sometimes the stop rod assembly will come off when disengaged. Just reinstall it when the time comes. Push the sides of the glove box into the center with gentle pressure. The glove box will hang free. Be very careful. There could be clips that need to be twisted and removed, depending on the vehicle. Now, find the cabin air filter housing behind the glove box compartment and unfasten the clips on the tray to reveal your filter.

K&N VF2001 replacement cabin air filter fits the following vehicles:

2018 Honda Ridgeline 3.5L V6 Fuel Injection
2017 Honda Ridgeline 3.5L V6 Fuel Injection
2015-2017 Acura TLX 3.5L V6 Fuel Injection
2015-2017 Acura TLX 2.4L L4 Fuel Injection
2014-2015 Honda Accord Hybrid 2.0L L4 Fuel Injection
2014-2017 Acura RLX 3.5L V6 Fuel Injection
2013-2017 Acura ILX 2.4L L4 Fuel Injection
2013-2015 Acura ILX 2.0L L4 Fuel Injection
2013-2014 Acura ILX 1.5L L4 Fuel Injection
2012-2014 Honda Crosstour 3.5L V6 Fuel Injection
2012-2014 Honda Crosstour 2.4L L4 Fuel Injection
2012-2015 Honda Civic Si 2.4L L4 Fuel Injection
2012-2015 Honda Civic 1.5L L4 Fuel Injection
2010-2011 Honda Accord Crosstour 3.5L V6 Fuel Injection
2010-2013 Acura ZDX 3.7L V6 Fuel Injection
2010-2014 Acura TSX 3.5L V6 Fuel Injection
2009-2017 Honda Pilot 3.5L V6 Fuel Injection
2009-2014 Acura TL 3.7L V6 Fuel Injection
2007-2016 Honda CR-V 2.4L L4 Fuel Injection
2009-2012 Acura RL 3.7L V6 Fuel Injection
2007-2014 Acura TL 3.5L V6 Fuel Injection
2007-2017 Acura RDX 2.3L L4 Fuel Injection
2007-2017 Acura MDX 3.7L V6 Fuel Injection
2006-2014 Honda Ridgeline 3.5L V6 Fuel Injection
2006-2011 Honda Civic Si 2.0L L4 Fuel Injection
2006-2011 Honda Civic GX 1.8L L4 Fuel Injection
2006-2015 Honda Civic 1.8L L4 Fuel Injection
2006-2011 Honda Civic 1.3L L4 Fuel Injection
2006-2011 Acura CSX 2.0L L4 Fuel Injection
2005-2017 Honda Odyssey 3.5L V6 Fuel Injection
2005-2007 Honda Accord Hybrid 3.0L V6 Fuel Injection
2005-2008 Acura RL 3.5L V6 Fuel Injection
2004-2014 Acura TSX 2.4L L4 Fuel Injection
2004-2008 Acura TL 3.2L V6 Fuel Injection
2003-2017 Honda Accord 3.0L V6 Fuel Injection
2003-2017 Honda Accord 2.4L L4 Fuel Injection

How do I Replace My Acura, Honda Accord, Civic, CR-V, Pilot, Odyssey & Ridgeline Cabin Air Filter

  1. Open glove box compartment. Fig. 1
  2. Locate glove box stop feature. In most vehicles this is located on the right hand side of the glove box.
  3. Remove fastener holding stop feature. Depending on your vehicle, the fastener may be a screw or a clip. Allow stop rod or cable to hang free. Fig. 2 & 3 NOTE: On some models the stop rod assembly may fall off when disengaged from glove box, simply reinstall on retention feature of vehicle.
  4. Apply pressure to the sides of the glove box pushing into the center. This will allow the glove box to hang free allowing access to the cabin filter housing. On some models, there may be clips that need to be twisted and removed. Fig. 4
  5. Locate cabin filter housing behind glove box compartment and unfasten clips on the cabin filter tray. Fig. 5
  6. Remove cabin filter tray from cabin filter housing. Fig. 6
  7. Remove dirty cabin filter. Fig. 7 NOTE: Most trays have tabs built in. Use caution to ensure you do not bend or break these tabs. Remove any debris that might be present on cabin filter tray and inside the cabin filter housing.
  8. Install K&N® Cabin Filter. Cabin filter will only fit in one direction. Once filter is installed correctly the filter will sit flush inside of tray. Fig. 8
  9. Reinstall cabin filter tray into cabin housing, ensure tray is locked into place.
  10. Reverse steps 1-4 to complete cabin filter installation. With the cabin filter installed, clean an area on the housing and apply the K&N® Stop Decal. The decal will help notify others that this is a reusable cabin filter.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8