How do I Find My Buick Allure, Century, LaCrosse, Regal, Chevrolet Impala, Monte Carlo, Citroen C2, C3/Picasso, C4 II, Oldsmobile Intrigue, Peugeot 308, RCZ or Pontiac Grand Prix Cabin Air Filter

Your cabin air filter is under the hood, under the cowl. Open up the hood. If you need to, unclip the washer fluid hose on the passenger side. Depending on which model you have, you might also have to put your windshield wipers in an upright position to take off the cowl. Peel the weatherstrip back to the center of the car. Now that everything is out of the way, remove the cowl from the firewall. There may be screw cap clips, push rod clips, or bolts holding the cowl on, so make sure to check for them before pulling on the cowl. After the cowl has been removed, if your model has a secondary panel, take that off as well. Now, you can remove the dirty cabin air filter.

K&N VF3000 replacement cabin air filter fits the following vehicles:

2010-2017 Citroen C4 II 1.6L L4 Diesel Engine
2009-2017 Citroen C3 Picasso 1.6L L4 Diesel Engine
2015-2017 Citroen C3 Picasso 1.2L L3 Fuel Injection
2016-2017 Citroen C4 II 1.2L L3 Fuel Injection
2017 Citroen C3 Picasso 1.4L L4 Fuel Injection
2010-2016 Peugeot RCZ 2.0L L4 Diesel Engine
2010-2016 Peugeot RCZ 1.6L L4 Fuel Injection
2009-2016 Citroen C3 Picasso 1.6L L4 Fuel Injection
2010-2015 Peugeot RCZ 1.6L L4 Fuel Injection
2009-2015 Citroen C3 Picasso 1.4L L4 Fuel Injection
2010-2015 Citroen C4 II 1.4L L4 Fuel Injection
2010-2015 Citroen C4 II 1.4L L4 Diesel Engine
2007-2014 Peugeot 308 1.6L L4 Fuel Injection
2007-2014 Peugeot 308 1.6L L4 Diesel Engine
2007-2014 Peugeot 308 1.4L L4 Fuel Injection
2007-2013 Peugeot 308 2.0L L4 Diesel Engine
2003-2010 Citroen C2 1.1L L4 Fuel Injection
2006-2010 Chevrolet Impala 3.9L V6 Fuel Injection
2006-2010 Chevrolet Impala 3.5L V6 Fuel Injection
2010 Citroen C2 1.4L L4 Fuel Injection
2001-2009 Citroen C3 1.6L L4 Fuel Injection
2005-2009 Citroen C3 1.6L L4 Diesel Engine
2001-2009 Citroen C3 1.4L L4 Fuel Injection
2001-2009 Citroen C3 1.4L L4 Diesel Engine
2001-2009 Citroen C3 1.1L L4 Fuel Injection
2001-2009 Citroen C2 1.6L L4 Fuel Injection
2006-2009 Chevrolet Impala 5.3L V8 Fuel Injection
2005-2009 Buick LaCrosse 3.8L V6 Fuel Injection
2005-2009 Buick Allure 3.8L V6 Fuel Injection
2008-2009 Buick LaCrosse 5.3L V8 Fuel Injection
2008-2009 Buick Allure 5.3L V8 Fuel Injection
2005-2008 Pontiac Grand Prix 5.3L V8 Fuel Injection
2004-2008 Pontiac Grand Prix 3.8L V6 Fuel Injection
2005-2008 Citroen C2 1.6L L4 Diesel Engine
2006-2008 Citroen C2 1.4L L4 Fuel Injection
2003-2008 Citroen C2 1.4L L4 Diesel Engine
2005-2008 Buick LaCrosse 3.6L V6 Fuel Injection
2005-2008 Buick Allure 3.6L V6 Fuel Injection
2003-2007 Chevrolet Monte Carlo 5.3L V8 Fuel Injection
2006-2007 Chevrolet Monte Carlo 3.5L V6 Fuel Injection
2006 Chevrolet Monte Carlo 3.9L V6 Fuel Injection
2006 Chevrolet Monte Carlo 3.5L V6 Fuel Injection
1997-2005 Chevrolet Monte Carlo 3.8L V6 Fuel Injection
1997-2005 Chevrolet Monte Carlo 3.4L V6 Fuel Injection
2000-2005 Chevrolet Impala 3.4L V6 Fuel Injection
1997-2005 Buick Century 3.1L V6 Fuel Injection
2005 Chevrolet Impala 3.8L V6 Fuel Injection
1997-2004 Buick Regal 3.8L V6 Fuel Injection
1999-2002 Oldsmobile Intrigue 3.5L V6 Fuel Injection
1998-1999 Oldsmobile Intrigue 3.8L V6 Fuel Injection

How do I Replace My Buick Allure, Century, LaCrosse, Regal, Chevrolet Impala, Monte Carlo, Citroen C2, C3/Picasso, C4 II, Oldsmobile Intrigue, Peugeot 308, RCZ or Pontiac Grand Prix Cabin Air Filter

  1. Depending on your model, it may be necessary to move the windshield wipers to an upright position to be able to remove the cowl.
  2. Open hood of vehicle.
  3. If necessary, unclip and move out of the way the washer fluid hose located on passenger side to access the cowl.
  4. Peel the weatherstrip back to the center of the car. Fig. 1
  5. Remove cowl from firewall. NOTE: On some models these may be push rod clips, screw cap clips or bolts holding the cowl. Fig. 2&3
  6. After removal of the cowl, some models may have a secondary panel that needs to be removed. Fig. 4 & 5
  7. Remove dirty cabin filter. NOTE: Remove any debris that might be present inside the cabin filter ducting.
  8. Install K&N® Cabin Filter. Fig. 6
  9. Reverse steps 1-6 to complete cabin filter installation. With the cabin filter installed, clean an area on the cowl and apply the K&N® Stop Decal. The decal will help notify others that this is a re-usable cabin filter.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6